Ho-ho-ho and Rub-a-dub-dub

Grover has a new battery boys and girls!



Don't you just love it when the new water pump
you bought doesn't come with the bolts, and the
thread is different to the old one!! Why is it that
these things are only discovered After the shops
have shut for the night!! I guess the neighbors
are happy, coz its 930pm!! =D



Break lines are almost done, again, a bolt
problem, cant find where I put them!! =(



Ive replaced the 3 break lines with new ones.
No cracks in the flexi hose is good for stopping!
Check out the tiny break cylinder!! Its so cute!



Fuel tank is all painted ready to go in! =)



If I'm really lucky, she may start this weekend!!

HOORAY!! =D

Turning Point

Today has been a long time coming.
A great day for all man kind!
A corner was turned.
Yes folks you guessed it...

BAH-BAH-BAHAHAAAAAH...

Project Grover Rover has commenced the rebuild!!

YIIPP-YIPPY-DOO-DIDDLY-DEEE-DAH!!! =D

With the combined brain power of Dodgy Dan, Bush
Tucker Dad, and Oober Nerd himself, today were
going to build a Grover!

With a couple of death knots hanging the chassis from a water pipe, we had Grovers ass in the air ready to recieve springs.



"Permission to scratch Grover" shouts Dan, holding a large hammer. We knew what needed to happen... I Nodded.... *WHUMP*WHUMP*WHUMP* And the springs were driven home.



After a short debate over which bolt goes where, air tools drove them home.

Lifting the engine was a breeze with the Lever Hoist I splurged on.
If only the garage was taller.
We couldn't quite lift the engine high enough.
So, with a rug over the chassis, we man handled the engine in place.

*S-C-R-A-A-A-T-C-C-C-H*

=( Oh well, had to happen eventually.



The next few hours were filled with me searching the garage for bolts and washers but in the end, Grover is finally a rolling chassis once more. Thanks Dan, Yer a bloody legend!! =D

Happy Christmas to Me!

Ive finally realized that Grover may not be a car before 2008... But not to worry, check out how much progress Ive made so far!! =)

The engine got a lick of paint on Christmas eve! Took longer to tape up than to paint.


Axle housings and springs got a tripple coat today.


They look shinier than when they were covered in mud and rust earlier!!


The firewall got sandblasted just before Christmas.


Look at the rust that the sandblasting found!! I chased it around with the MIG set to 1 for about 4 hours!! JOY! =(


After powder coating the firewall looks fantastic! But it didn't cover the rust holes i missed, Oh Well. Better ventilation I guess! =D


Heres the new water pump on the left, and you can see the taper thread that is much better than the silver-solder bung job they did in the original!!


I took the opportunity to paint EVERYTHING since the car was in bits! It just made sense!!


Lucas is the prince of darkness, but I swear this Lucas starter motor will work! First time, every time, guaranteed (fingers crossed!!) Will work even better with its hammer finish paint job!! Awesome!! =D


More misc-bits in various shades of kill rust!


Rear drums had no paint at all, and I sear, this wast the only colour I had!! Fully Sick Bro!! ;-)


Watch this space, there will be a rolling chassis sitting here in a few days, mark my words!!


Onwards and upwards! Kazzar!! =D

Snowsports and AlcoholicCafinatedBeverages

Hello All, Its been a while since my last post, and while there hasnt been much rover action, there has been action none the less. Heres a brief review of the past few months.

A 4 week holiday in snowy and sheepy New Zealand saw us being van dirtbags for 3 weeks where we did some of the normal tourist'y things, but also bush walked through the alpine region, bouldered (on volcanic plugs on the beach and in limestone roadside caves and at the mecca that is Castle Hill), and mostly camped for free and didnt shower!! Our 3 week van dirtbag holliday was offset with a week of luxury apartment relaxing in wanaka while we learnt to snowboard and ski at Cardrona, Corenet Peak and Trebble Cone! Truly Awesome!! We came home bruised, with big smiles, and feeling very relaxed.

Soon after comming home, I partly tore a tendon in my little finger, which needed rest (no climbing or grover rover). So i went out drinking with the lads from work (Team Building...) and proceeded to write myself off on too many beers, sahki, jaygermiester bombs and vodka and cranbury, waking up the next day with no use of my left arm... seems I fell over in a big way. So Ive been in physio for the past 3 weeks!

Anyway, my arm is kind of working now, and Ive FINNALY got back into the project!! HOORAY! Here's the latest!

My Firewall was baddly rusted, but my donor firewall was not.
However there were 2 things that needed fixing.

This is a door hinge that dad welded back on for me while I was resting my arm.


And here you can see some welding done to the top of the firewall.
This is what the windscreen rests on.


This is the back side of the windscreen mount.
Looks shite but its watretite!! HAHAHA! =)


I quickly butted everything together to make sure it all fitted to the new firewall.
this is the floor pan and seat box butted up to the firewall base.


Here you can see it all fits! Even the windscreen!



Next week the firewall will be sandblasted and powdercoated.

And over the christmas-new-year-break, GROVER WILL LIVE AGAIN!!!

Beer Time

It seems like forever, but Im typing this entry with
a beer, and a grin, because the chassis is black!



Now I have the painting bug!
Before i bolt everything back on, Im going to
consider giveing bits a lick of paint! =D

Watching Paint Dry

This week sees the ever fearless Rust-Man take a break from
welding and grinding and cutting as he steps forth, bravely, into
a brave new frontier.....

Spray Painting!

The chassis now sits on milk crates and axle stands.
(with tent pegs through the spring hangers).
This makes it easy to spray underneath.

With a few coats of Watyl Kill Rust Etch Primer,
she looks great!! =)



Here's what I've learnt...

30-40psi airflow is all you need for gravity feed
spray gun's. (I started with 100psi and found that
paint drys as it comes out of the gun!!)
Etch primer isn't easy to spray, it is touch dry in
5 minutes, mostly because its about 80% thinners!!

Allow a day for the priming, paint 2-3 thin coats,
sanding lightly between coats (to get the over
spray off use 240 grade sand paper).

Next, its top coat time!
At this pace I'll have the wheels back on in no time!! =D

Chassis Debriss

Heer yee heer yee...
Roll up for the.... Longest Show on Earth! =D

Its been a few weeks since the last post, and no, I haven't
been slacking off! Ive been putting in the hard yards!
So grab your beverage of choice, sit back and enjoy the
latest installment of Project Grover Grover!

Last weekend I got stuck into the rear bumper, or as Neil
calls it... Chassis-Debriss.

Below you can see fiddly welding I was faced with after
cutting a large chunk out! But I'm getting heaps better, so
I finished this in half a day! Also, i was able to grind the
weld down so you cant even see it! =D
(You may also enjoy the chassis debriss to its right...)



After welding the right, I set about cutting and welding
the middle and left.



Now Grovers bum is good and solid, ready to tackle
any curry I throw at it! Mmmm Vindaloo.... =D



While in the mood for welding, i cranked the power
up and showed the gearbox mount who was boss!



So with all the big stuff out of the way last weekend,
this weekend was all about sanding and wire brushing
all the fiddly nooks and crannies, and bang'n a few
extra drain holes here and there!

With all that out of the way, one last fun job!
Check out the snazzy battery box I made!
I'm super proud of this! Should be big enough for an
extra huge truck battery!! =D



Its almost 8pm Saturday night, and the neighbours
are gett'n shirty. But Ive got the chassis all setup in
spray booth, ready for some Sunday Lov'n!



These quick-draws are retired from climbing,
but still good for hang'n a chassis up!



Old climbing rope gets the other end sorted out!
Thats Right! Its a figure 9 ;-)



4pm Sunday, after spending the morning shopping
for formal wear... (no yer bum doesn't look fat in that) =D
I'm back home slapp'n a coat of cold gal on the old girl.



Grovers on the get up and go boys and girls,
and Cam's a Happy Camper!

Cheers and Beers! =D